-
These flexible exhaust pipes are intended for weld in installation in an exhaust system to isolate noise, relieve vibration, and reduce the stress on the pipes a stainless steel internal bellows for vibration isolation, an internal stainless steel braid to reduce noise, and whistling.
-
Made by Stainless Steel, durable, and corrosion resisting.
-
Universal for most cars to use.
-
No instruction included.
-
Material: Stainless Steel
-
Color: Silver Tone
-
Inner Diameter: 45mm / 1.77"
-
Outer Diameter: 50mm / 1.97"
-
Body Length: 136mm / 5"
-
Overall Length: 160mm / 6"
-
First, remove the old exhaust flex pipe.
-
Then place the free end of the new exhaust flex pipe on it and adjust the position of the muffler and downpipe until it is straight but without tension.
-
Pass the bolt through the hole at the end of the exhaust flex pipe connected to the muffler flange. Tighten them to secure the pipe to the flange.
-
Place a new clamp where the exhaust flex pipe meets the downpipe and tighten it. Retighten the bolts that secure the muffler and downpipe.
-
Please allow 1-2mm error due to manual measurement.
-
1 x Car Exhaust Flex Pipe
