for 70mai Parking Surveillance UP02 Cable for 70mai 4K A800S Dash Cam WIDE D07 PRO Plus+ A500S Car DVR A400 Hardwire Kit for 24H Parking Monitor in Ca
Can be used for:
-
for 70mai Dash Dam 4K A800S
-
for 70mai Dash Dam Pro Plus+ A500S
-
for 70mai Dash Cam Lite D08
-
for 70mai Dash Cam A400
-
for 70mai Dash Cam Wide Mirro D07
-
for 70mai Dash Cam M300
-
for 70mai Dash Cam 1S D06 (Not for parking but for power supply)
Specification:
Material: ABS
Output voltage: 5V
Output current: 1A/1.5A/2.5A
Standby power consumption: ≤ 0.01W
Low Voltage Protection: 11.6V
Output interface: Mini usb
Net weight: About 0.12kg
If you are worried about your car being damaged by someone else after parking, you can use our buck line to connect the DVR to ensure that the recorder works 24 hours.If someone else hurts your car and the shock triggers the G-sensor, the DVR will immediately turn on and record the situation.
Buck Line
Use the buck line to not occupy the cigarette lighter interface.
First, connect the negative pole(black line) of the buck line to the ground of the car fuse box;
Secondly, if you want to continue monitoring after parking (the DVR works 24 hours), connect the positive pole(red line) of the buck line to the BAT interface of the car fuse box;
If you want to stop monitoring after parking (the DVR does not work after parking), connect the positive pole of the buck line to the fuse box ACC interface.
How to Hidden The Parking Cable?
1.Connect with Cae ACC power,when start car engine,dvr will turn on automatically,when turn off car engine,dvr will turn off automatically.
2.Connect with Car battery or often electricity,can support 24 hours power for dvr work,sipport car dvr is Parking Monitor function.
Input:12V-24V; Output:5V/3A, hardwire kit is suitable for most car models(Voltage between 12-24V). Our hardwire kit Equipped TYPEC USB conversion cable,works for almost all car
We offer 2 different fuse holders and fuses:
1* Car ACU Connector
1* Car ACS Connector
1* Car ACU Fuse
1* Car ACS Fuse
Medium fuse holder with fuseSmall fuse holder with fuse as the pictures show.
They can support most of cars
Use voltage drop line installation, does not occupy cigarette lighter, cigarette lighter
for mobile phone charging, saving space
Low-voltage protection: This is the protection when the normal power (battery) is connected, that is, when the input voltage is lower than 11.6, the main board will automatically power off and will not continue to consume the battery's power, So as to ensure that the car can normally ignite and start the car.
Step-down function:It can convert the voltage of 12-30V into the output voltage of 5V. The
input voltage of electronic products such as cardriving recorder and GPS are all 5V
Multiple Security Protection
With low voltage protection, our hardwire kit will automatically cut off the power after 60s when the voltage is lower than 11.6V/23.6V (it depending on your vehicle). More security protection like over-current, short-circuit, reverse connection, and overheat.
4 DUAL-SLOT fuse holder
4 DUAL-SLOT fuse holder, Standard ATO, mini, low profile mini and micro2. 4 types, suit for most cars on the market
Fuse adapter installation
Fuse Adapter
1. Pull out the orginal fuse at fuse box
2. Insert the orginal fuse to LOWERslot on the adapter
3. Insert fuse to the UPPER slot
4. Insert the adapter to the fuse slot at fuse box
Wire Connection
If you just want the car key to turn the dash cam on or off, please follow these steps
1. Red wire connect car key power ACC+12V
2.Yellow wire connect with car key power ACC+12V
3.Black wire connect with GND
If you want 24h parking monitor function:
1. Red wire connect car key power ACC+12V
2.Yellow wire connect with 12V (B+) (not controlled by the ignition key, when your car does not start, it is still energized, it can be tested with an electric pen)
3.Black wire connect with GND
