Vgate iCar Pro elm327 V2.3 OBD 2 OBD2 Car Auto diagnostic Scanner WIFI Bluetooth 4.0 for IOS Scan Tool ODB2 PK ELM 327 V1.5 V1 5
How to use the code to get discount:
Tips:
If you use the IOS phone to work with iCar pro Bluetooth 4.0,please don't connect iCar pro in Bluetooth,just open the bluetooth,then Open the APP,find and connect the bluetooth in APP
How to choose the one for you?
ICAR PRO With Firmware V2.3
ICAR PRO BT 4.0: For IOS /For Android / For PC
ICAR PRO WiFi: For IOS /For Android / For PC
ICAR PRO BT 3.0 : For Android / For PC
Vgate iCar Pro Features:
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning. (over 3000 generic code definitions in the database).
Clear trouble codes and turn off the MIL ("Check Engine" light)
Engine RPM
Calculated Load Value
Coolant Temperature
Fuel System Status
Vehicle Speed
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Timing Advance
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short term fuel trims
Fuel System status
Fuel Pressure
Many othershellipSpecial Feature 2: Automatically wakes up.
In a non working state, enter sleep mode within approximately 30 minutes. When the vehicle starts and the voltage changes, the device automatically wakes up.
Vgate iCar Pro OBD II adpater is a High-quality automotive scanning tool, Supports all OBD-II protocols:
SAE J1850 PWM (41.6 Kbaud)
SAE J1850 VPW (10.4 Kbaud)
ISO9141-2 (5 baud init, 10.4 Kbaud)
ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
ISO14230-4 KWP (fast init, 10.4 Kbaud)
ISO15765-4 CAN (11bit ID, 500 Kbaud)
ISO15765-4 CAN (29bit ID, 500 Kbaud)
ISO15765-4 CAN (11bit ID, 250 Kbaud)
ISO15765-4 CAN (29bit ID, 250 Kbaud)
SAE J1939 CAN (29bit ID, 250 * Kbaud)
USER1 CAN (11 * bit ID, 125 * Kbaud)
USER2 CAN (11 * bit ID, 50 * kbaud)
* Default Settings (User Adjustable)
Vgate iCar Pro Specification:
Supply Voltage: 11.5V-15V
Supply Current: <200Ma
Standby Current: <30Ma (TONWON Pro = <3Ma)
Operating temperature: -40 ℃ – 85 ℃
Operating Humidity: 5% – 95% RH Non-Dewfall
Hardware version:V2.3
Supported systems:Android/IOS
Connection method:BT3.0/4.0/WIFI
How to connect Vgate iCar Pro?
For Android
4 EASY STEPS
1,Download The APP
2,Connect Scanner to Car 0BD2 Port ( Turn on engine after scanner is connected )
3,Connect 0BD2 Adaptor With Phone via Bluetooth
4,Launch App And Set up Bluetooth again.
For IOS
1,Open WLAN(V-LINK)in phone settings
2,Software installatlion > OBD Auto Doctor OBD II software developed by "Vgate" >
Configure Wi-Fi setting on the OBD Auto Doctor App.
1 x Vgate iCar Pro OBDII
1 x User manual