Product Description
This blind zone detecting system is a vehicle assistance device that helps you safely changing the lane during driving & improve driving safety. The LED indicator will alert you when there is a moving object into the vehicle blind area, so that the you can be caution when lane changing to avoid the possibility of traffic accident & improve driving safety.
The system can monitor the closing objects in the neighbor lane within a range of 3.5*12 meters with speed gap over 0.5m/second. When the moving object enters the blind area, the LED light will be flash to alert the driver.
If the steering is turned on, the system works in lane change assistant mode & the LED light will flash rapidly and the buzzer beeps three times to alert the driver being careful to change a lane.
With 2pcs 24GHz microwave sensor, probe the rear side of the vehicle for moving objects into the blind area of the detection zone.
IMPORTANT
1、Can install on cars with a plastic bumper only, not work with vehicles with a metal bumper.
2、This item fits for most DC12v sedan, compact, SUV, MPVs, pickup etc and professional audio installer installation is required.
3、This system is only auxiliary during driving. Please operate according to the actual traffic conditions. You cannot rely on this product completely in case of accident.
4、The ACC cable must be controlled by the ignition switch of the car, if you connect the ACC wire with the constant 12V wire, the device may consume the car battery.
5、This product comes with an English user manual and wiring diagram.
If you have any requirements for Korean and Russian user manuals and wiring diagrams, please contact the merchant to request them.
Why did you choose us?
1. We are a manufacturer. Our products are sold directly. We guarantee stable quality and very favorable prices.
2. Our products have passed CNAS certification and EU CE certification, so you can buy them safely.
3. As a professional manufacturer of automobile safety products, we can help our buyers to solve all the problems. We are a reliable partner for you.
Product main characteristics
Usage scenario
BSD&LCA Blind Spot Monitoring
During the driving process of vehicle A, vehicle B cannot be seen from the rearview mirror. When vehicle B enters the detection area, the alarm light will light up.
In this case, vehicle A will turn on the turn signal, the alarm light will flash, and a BIBI warning prompt will be issued at the same time
Door opening warning
Door opening warning function, when parking and opening the door, it will warn the driver when a vehicle or pedestrian is detected in the rear to avoid collision with a vehicle or pedestrian in the rear when the door is opened
The product comes standard with the first two door open warning functions. The vehicle works when it is ignited and cannot work when it is turned off
If the vehicle needs to be opened to warn after it is shut down, (optional) the door opening function is required. This feature is suitable for vehicles with four doors (requires additional modules) and can work within 2 minutes after closing
Alarm mode
Tier 1 alarm: LED light is constantly on
Tier 2 alarm: Turn on the turn signal, LED light flashes+BIBI sound alarm
Installation diagram
Remove the rear bumper and determine the installation position of the radar probe module. The position is located at the arc of the rear bumper of the car. After drilling, the base of the probe bracket is installed.
The angle and height are as shown in the figure below: the module is marked with the head facing up.
*Note:
1、 The installation angle and height of the radar probe are very important. For the best experience, please install at the above height.
2、The radar probe is vertical and must not be tilted to the ground. The left and right sides are inclined outward by 20 degrees.
3、Please use the angle calibration scale and calibration line in the accessory to calibrate according to the calibration method.
4、The radar probe can't be installed on the taillight, the reversing radar, and the metal rear to avoid the effect.
Installation method
Connection method
Product Packaging
Main components: 2 millimeter wave radar probes, 2 LED lights, 1 buzzer
Accessories: 1 package of screw and tie-up, 1 wires, 1 Instructions, 1 auxiliary card for installation，2 brackets
