-
These flexible exhaust pipes are intended for weld-in installation in an exhaust system to isolate noise, relieve vibration, and reduce the stress on the pipes a stainless steel internal bellows for vibration isolation, and an internal stainless steel braid to reduce noise and whistling.
-
Made of Stainless Steel, durable, and corrosion-resistant.
-
Universal for most cars to use.
-
No instruction included.
-
Material: Stainless Steel
-
Color: Silver Tone
-
Inner Diameter: 61mm / 2.40"
-
Outer Diameter: 65mm / 2.56"
-
Unwelded Length: 150mm / 5.91"
-
Overall Length: 245mm / 9.65"
-
1. Remove the old exhaust flex pipe.
-
2. Place the free end of the new exhaust flex pipe on it and adjust the position of the muffler and downpipe until it is straight but without tension.
-
3. Pass the bolt through the hole at the end of the exhaust flex pipe connected to the muffler flange. Tighten them to secure the pipe to the flange.
-
4. Place a new clamp where the exhaust flex pipe meets the downpipe and tighten it. Retighten the bolts that secure the muffler and downpipe.
-
Please allow a 1-2mm error due to manual measurement.
-
Please wear gloves when installing to avoid scratches.
-
Professional Installation is highly recommended!
-
1 Pcs Car Exhaust Flex Pipe
![](https://i0.wp.com/ae01.alicdn.com/kf/S9241adc4802243ab9169a45b53a76100Q.jpg?w=1200&ssl=1)
![](https://i0.wp.com/ae01.alicdn.com/kf/Sdd0494a7d3e44d60a015a23834ed9fdbT.jpg?w=1200&ssl=1)
![](https://i0.wp.com/ae01.alicdn.com/kf/Sf7574ceda5044d2fa8b5242002c79e11u.jpg?w=1200&ssl=1)
![](https://i0.wp.com/ae01.alicdn.com/kf/S9f7b7e1756ec4e068e3f05a6bd30b187A.jpg?w=1200&ssl=1)
![](https://i0.wp.com/ae01.alicdn.com/kf/S1951140fa82f480191e191ab0ed0b880M.jpg?w=1200&ssl=1)