Woyo original brand new
PL007 CAN / LIN Tester
WOYO CAN LIN Tester is a digital tester designed specifically for automotive electronics, which can detect whether the CAN and LIN communication status is normal and whether there is data online or offline.
The tester automatically recognizes CAN-High, CAN-Low, and automatically detects baud rate.
Description:
1: CAN signal digital measurement. CAN baud rate, data, ID can be displayed, and CAN high and low signal lines can be automatically distinguished.
2: LIN signal digital measurement. Can display LIN baud rate,Data, ID.
3: The internal 9V (6F22) battery is used for power supply.
Advantages: For communication measurement and maintenance of Can and LIN lines, it is more convenient and real-time than before to connect a computer or oscilloscope through a CAN analyzer. It is portable and intelligent to start maintenance work anytime and anywhere!
Button function:
ON/OFF:
Short press —- Open the Tester
—- Change CAN/LIN Tester
Long press —- Close the Tester.
CAN Mode Test:
CAN Range：100-125-150-200-250-300-400-500-666-800-1000kbps
PL007 can recognize CAN-L/CAN-H
Red pen read Left display, Black pen read Right display.
LIN Mode Test:
LIN：2400-4800-9600-14400-19200bps
Red pen connects to LIN, Black pen connect to GND
Small size, portable to use.
Function:
CAN Mode:
Insert the probe into the socket, connect the pins, and the screen display the baud rate
and corresponding CAN-H/CAN-L pins.
After 3s, displays real-time data.
LIN Mode:
Red wire connects to LIN, black wire connects to GND.
If no data is displayed, please check if the pin connections are correct or if there is poor contact,
or if the mode doesn’t match.
If the screen displays “LOW POWER”,please replace the battery.
When you use the PL007 but cannot test the CAN BUS Module, please check and confirm these steps:
1. Does the device have power? How much baud of your CAN BUS module?
–PL007 CAN BUS Tester support: Range: 100-125-150-200-250-300-400-500-666-800-1000kpbs
2. Does the device normal to work with CAN BUS?
3. Confirm you test the correct CAN-High or CAN-Low PIN hole, not other PIN.
4. Test 2 or 3 CAN BUS module to confirm, if only one device couldn’t be test, but other is normal?
Package list:
Tester*1 (not include the black & red test pen and 9V battery)
